Custom Clothing & Merchandising with No Minimum Order at Beetle Print

1. What this customisation factory is and why this page exists

When a company, sports club, brotherhood, Fallas committee, town council, school or personal brand wants custom merchandise, the usual experience is landing on online shops that only sell one thing: only t-shirts, only caps, only mugs. Beetle Print works differently. We're a made-to-order production factory that manufactures, under one roof and through a single point of contact, virtually any textile and non-textile merchandise piece that can carry a logo: clothing, sports kits, caps and hats, bandanas, fans, backpacks, socks, embroidered keyrings, patches, pins, charms, packaging and 3D-printed pieces.

This page is the central guide to that whole customisation offering: it brings together, in one place, what we make, how to order, and links to every product-specific guide (hoodies, caps, embroidery, sports kits, DTF, etc.) and to the network of local support pages we've already published for the Comunidad Valenciana in Spain. If you're after something very specific, use the index above or the page search; if you're not yet sure what you need, keep reading — this page is designed to give you the full map.

The ordering model is the same across every category: there isn't a separate product page for every possible combination of garment, size, colour, technique and quantity — that would be an endless and inevitably incomplete catalogue. Instead, you tell us about your project over WhatsApp, with your logo or design, and you get a product and technique recommendation plus a real quote tailored to your quantity and your deadline — exactly how it already works today for packaging, 3D creation or glass jars. The Personaliza tu Merch page (currently in Spanish) is the official entry point to this model.

2. Why centralise your merchandising with a single manufacturer

It's common for a company to end up with its merchandise spread across three, four or five different suppliers: one for t-shirts, another for caps, another for packaging, another for welcome gifts. Each supplier invoices separately, each one interprets the logo their own way, and every new order starts from scratch explaining the brand again. It's nobody's fault in particular — it's the logical result of working with workshops that specialise in a single technique and have neither the interest nor the capacity to make the rest of the pieces you need.

Centralising with a single factory changes three or four concrete things, not just "convenience":

3. Custom clothing: t-shirts and hoodies

Clothing is the most common starting point for any merchandising project: t-shirts for a company team, for a campaign, for an event, or to sell under your own brand, and hoodies for the colder months, staff uniformity, or premium merchandise. We work with different printing and embroidery techniques depending on the design, the fabric and the quantity, adapting the technical recommendation to each project instead of always forcing the same solution.

The choice between t-shirt and hoodie isn't only about looks or season: a lightweight t-shirt prioritises comfort during long days or warm climates and tends to be the default choice for events and short-lived campaigns, while a hoodie feels like a more durable, "uniform-like" garment, which is why it's often used as a staff piece or premium merchandise that the end user keeps for longer. That difference in perception also affects which customisation technique makes more sense in each case — something we review with you on your specific order.

For the technical detail of every printing and embroidery option on company hoodies and t-shirts, check the dedicated guide Custom Hoodies & T-Shirts for Companies and Teams.

4. Custom sports kits

We manufacture made-to-order sports kits for clubs, amateur teams, in-house company tournaments or one-off sporting events: technical jerseys, full team sets with numbering and names, and the rest of the pieces that make up a complete kit. Since it's made-to-order production, the starting point is your own design and crest or logo, not a closed generic club template.

A full kit is rarely a single garment: it usually combines a technical jersey, shorts or trousers, and, in many cases, a separate training kit alongside the match-day kit. Individual numbering and names add another layer of customisation on top of the club design, so it's worth defining from the start whether the order includes per-player personalisation or a single design for the whole team, as it changes both the production process and the delivery time.

For the full guide, see Custom Sports Teamwear for Clubs, Companies and Amateur Teams.

5. Custom caps and hats

Caps and hats are one of the merchandise pieces with the most visual presence thanks to where they sit — right at face height, highly visible in photos and video — and they support several customisation techniques depending on the effect you're after, from classic flat embroidery to more raised finishes. It's a common piece both in company merchandising and in events, sports clubs and clothing brands launching their range with an accessory before a full garment.

Beyond the customisation technique, the cap or hat model itself also affects the result: a curved-brim cap with an adjustable back behaves differently from a flat-brim trucker style, and a wide-brim hat offers a different embroidery surface to a classic five-panel cap. We confirm the base model together with the technique before production, because the same design can look perfect on one model and lose legibility on another.

For the full guide, see Custom Caps & Hats.

6. Custom embroidery: from caps to keyrings

Embroidery is a technique we use across several different pieces in the catalogue, not just clothing: caps, hoodies, backpacks, and also embroidered keyrings — a small piece with a strong perceived result, because embroidery adds relief and texture that flat printing can't achieve. Embroidery tends to hold up well through use and washing, so it's often recommended for long-use pieces or corporate image items where visual wear matters more than it would on a one-off promotional piece.

Before embroidering any design there's a mandatory technical step: digitising, meaning converting your logo into a stitch file that the embroidery machine can run. A logo with very thin lines, very small text or colour gradients doesn't always digitise well for embroidery the way it was designed for print, so for complex designs we usually propose a version adapted specifically for embroidery, without losing the spirit of the original design.

Full dedicated guide at Custom Embroidery for Companies.

7. Custom bandanas and fans

Bandanas and fans are pieces with a strong tradition in local festivals, events and warm-weather company details: a custom bandana is common at local patron saint festivals, social clubs and sporting events, and a custom fan is an appreciated detail at weddings, fairs and summer campaigns. Both pieces support full-colour design adapted to the format.

The practical difference between the two formats is usually about use rather than technique: a bandana works well as a piece of collective identification — the whole group wears it the same way throughout the event — while a fan has more of an individual keepsake element, something handed out and kept after the event. That difference in use is usually the first thing we ask about when working out which one fits your project better.

For the full guide, see Custom Scarves and Fans for Fiestas, Weddings and Events.

8. Custom backpacks and bags

Custom backpacks and bags combine everyday utility with prolonged brand visibility: unlike a t-shirt that's worn on a one-off basis, a well-chosen backpack accompanies the user day to day for much longer, making it one of the merchandise pieces with the best ratio between cost and sustained brand exposure.

Not every surface of a backpack is equally suited to carrying a logo: the front panel offers more everyday visibility, while a side panel or the top of a pocket goes more unnoticed but also suffers less friction during daily use. The fabric type and reinforcement of the backpack also affect which customisation technique holds up best over prolonged use, so we assess it together with the specific model you choose.

For the full guide, see Custom Backpacks for Companies.

9. Custom socks

Custom socks have become established as a company gift and sports club merchandise item thanks to their low perceived cost and high surprise factor: it's not a piece that's usually given away personalised, so it stands out against more common merchandise options (pens, notebooks, generic t-shirts).

Customisation on socks tends to concentrate on the leg — the visible area above the shoe — because it's the part that actually shows during everyday use; the sole and heel take more friction and wear, so they aren't always the best location for a design you want to stay crisp over time. It's a small nuance, but it marks the difference between a custom sock that ages well and one that loses its design after a few washes.

For the full guide, see Custom Socks: Full-Sock Design with No Minimum Order.

10. DTF printing and other print techniques

DTF (Direct to Film) is one of the textile printing techniques we use across different pieces of the catalogue: it allows full-colour designs with good detail on a wide range of fabrics. It's not the only technique available — depending on the project, the fabric and the quantity, we also recommend screen printing, embroidery or other options — so the final technique is confirmed based on your specific design, rather than always forcing the same solution across every project.

One practical tip regardless of the technique chosen: the lifespan of any textile print also depends on how the garment is washed afterwards. Washing inside out and avoiding a high-temperature dryer extends the life of any print, whether it's DTF, screen printing or embroidery — a detail we usually share along with the delivered garment.

For the full guide, see DTF Printing Explained: What It Is and When to Use It.

11. How to choose the right technique for your project

A question we get constantly on WhatsApp is "which technique is best?" — and the honest answer is that it depends on specific variables in your project, not on one technique being objectively superior to the rest. Embroidery, DTF, screen printing and other print techniques each solve different problems well, and part of our job as a manufacturer is to make that recommendation with judgement rather than always selling the same solution because it's the one we have closest to hand.

These are the variables that really decide the technique, in the order we evaluate them for each project:

12. Build your brand: made-to-measure clothing with your own patterns

For projects that go beyond customising an existing garment, we also work with made-to-measure clothing built from our own cutting patterns: the starting point isn't a catalogue garment with your logo printed on top, but developing the garment from the pattern up — aimed at sportswear or fashion brands that want to launch their own collection, not just customise merchandise. It's the deepest level of made-to-order production in the whole catalogue, and as such it requires more planning and a dedicated development process over WhatsApp.

This level of work involves different steps to customising a catalogue garment: pattern and sizing definition, choice of technical or fashion fabric depending on intended use, a physical prototype to validate drape and fit before producing the full run, and a technical spec sheet kept as a reference for future reorders of the same collection. It's a longer process than customising merchandise, and we treat it as such from the first WhatsApp conversation.

For the full guide, see Start Your Own Sportswear Brand with Beetle Print.

13. The rest of the Beetle Print universe: keyrings, pins, packaging and more

Custom clothing and textile merchandising is only one part of what we manufacture. Beetle Print also covers a very wide range of non-textile merchandise, graphic design and packaging, already documented in detail in our own guides (currently available in Spanish, with English versions coming):

The underlying logic is always the same across all these lines: a single point of contact at the factory, a tailored quote per piece, and the real possibility of combining several categories — for example, staff hoodies, embroidered gift keyrings and branded packaging — within a single order and combined quote.

14. Beetle Print in Spain: our local network in the Comunidad Valenciana

Alongside this national guide, we serve Valencia, Alicante, Castellón and their surrounding areas with particular closeness, with content and attention geared to very local needs: Easter brotherhoods, Fallas committees, town councils, schools and event organisers all have merchandising needs different from a standard company's, and we're developing specific guides for each of them.

If you have ties to any of these communities — for example, as an expat, an international visitor, or someone connected to a comisión fallera — that local closeness has very concrete advantages beyond friendly service: being able to check a fabric colour or approve a physical sample in person before launching a large run reduces the margin for error on an important order, something that's always harder to judge precisely over a video call or a photo.

15. From idea to product: how Beetle Print thinks through a customisation project

When a new project comes in over WhatsApp, we don't process it as "just another catalogue order". We think about it as a manufacturer that has to solve a specific problem: which piece, which technique and which quantity get the best result within that particular brand's budget and deadline. That way of thinking follows an internal logic that repeats on every project, whether it's a run of 20 t-shirts for an amateur team or a combined order of hoodies, caps and packaging for a company.

First we understand what the piece is going to be used for — everyday uniformity, a one-off gift, event merchandise, launching your own brand — because real-world use drives more technical decisions than the design itself: a daily-use garment prioritises durability, a single-event piece prioritises immediate visual impact and a tight cost. Then we look at the design and the logo: how many colours, what level of detail, whether it's already in a clean format or needs prior graphic design work. And only with those two pieces of information — use and design — does it make sense to talk about technique, product and quantity, in that order.

This sequence matters because it avoids the most common merchandising mistake: choosing the "trendy" product first — backpacks today, socks tomorrow — and forcing the design and budget to fit afterwards. We prefer the opposite path: understand the project first, and let the product and the technique be a logical consequence of that conversation, not the starting point.

16. How to order: step-by-step process over WhatsApp

17. Sectors and real use cases

This list isn't closed either: as a made-to-order factory, any project that needs a logo or design on a garment or physical piece can fit here. If your case isn't reflected above, tell us about your project on WhatsApp.

18. Comparison table: which product and technique to use for each case

19. New guides: sports teamwear, backpacks, socks, DTF, scarves & fans and your own brand

We've just published six new in-depth guides covering categories that were previously only summarised on this page. Each one follows the same honest, no-invented-numbers approach as the rest of our content, with real WhatsApp contact and links back to this pillar page.

20. Frequently asked questions